Topic: need hELP on 3sixty2 and eclipse 7200

[ahbell]

sifus help me.....i duuno whether shall i get 3sixty2 or get eclipse 7200.
here are all the details u need
14.4V Power Supply CD7200 mkII
Max. Power Output no amplifier section
Lineout Output Level/Impedance 8V(0dB)/55ohrm
Tone Control
Bass/Mid/Treble ±12dB at 80Hz/±12dB
at 630Hz/±12 at 10kHz
Loudness +10dB at 100Hz/+6dB at 10kHz
FM
Frequency Range USA: 87.75 — 107.9 MHz (200kHz step)
Latin America: 87.75 — 107.9 MHz (100kHz step)
Usable Sensitivity 15dBf
Frequency Response 30 — 15,000Hz ±3dB
Stereo Separation 38dB (1kHz)
AM
Frequency Range USA/Latin America: 530 — 1,710kHz (10kHz step)
Usable Sensitivity 22muV
CD
Frequency Response 20 — 20,000Hz, ±3dB
S/N Ratio (A-weighted) 100dB
Total Harmonic Distortion 0.008%
Channel Separation 85dB
USB
Frequency Response 20 — 20,000Hz, ±3dB
S/N Ratio (A-weighted) 100dB
Total Harmonic Distortion 0.008%
Dimensions (W by H by D) 7inchby 2inchby 6-1/8inch(178 by 50 by 155mm)

and RF 3sixty2

Description Value
Configuration Digital Signal Processor
Input Impedance 10k Ohms
Signal Input High-Level: 6-channel (FR/FL/RR/RL/Center/Sub)
Low-Level: (8) RCA (FR/FL/RR/RL/Center/Sub/L-AUX/R-AUX)
Signal Output Low-Level: (6) RCA (FR/FL/RR/RL/Center/Sub)
Input Voltage 20 Vrms max.
Output Voltage 5 Vrms
Output Gain: +/- 10dB
THD+N <0.01%
Signal-to-Noise >100dB (A-weighted)
Crossover Type 3-Way adjustable w/ Subwoofer
Front/Rear/Center: High-Pass / Band-Pass / Low-Pass
Subwoofer: Low-Pass
Crossover Frequency 62 steps between 50Hz-10kHz
Crossover Slope 12dB/octave Butterworth
24db/octave Linkwitz-Riley
Subsonic Filter: 12dB and 24dB/octave
EQ Frequency Centers 31 bands @ 20Hz-20kHz
ISO 1/3 Octave centers
EQ Frequency Controls +/- 10dB
Palm® OS Requirements Palm OS® V 5.0 (or higher)
Bluetooth®
320x320 display
16-bit color resolution
Palm® OS Compatible Palm® LifeDrive™
Palm® Treo™ 650
Palm® Treo™ 700P
Palm® Tungsten™ E2
Palm® Tungsten™ T5
Palm® TX
SONY® PEG-NZ90
SONY® PEG-UX40
SONY® PEG-UX50
Zire™ 72
Zodiac
Zodiac2
Windows Mobile® Requirements Windows Mobile® 5 (or higher)
.Net Compact Framework 2.0 (or higher)
Microsoft Bluetooth® Stack
Windows Mobile® Compatible Dell™ X51
Dell™ X51V
Dell™ X50 (requires Dell OS upgrade)
Dell™ X50V
E-Ten G500+
Palm® Treo™ 700W
Palm® Treo™ 700WX
T-Mobile MDA
T-Mobile SDA
Sprint® PPC-6700
Cingular VX6700

Incompatible Devices Samsung BlackJack
Motorola Q
HP (all devices)
Mounting Trunk
Shipping Weight 1.0 Lbs.
(0.45 Kg.)
Dimensions 1.75" H x 7.25" W x 4.25" D
4.45 H x 18.41 W x 10.79 D (cm)


this shows that 3sixty2 has more EQ settings and more crossover settings....in this choice shall i get 3sixty2 or eclipse 7200. i'm not sure and i reli need help...

[carcrazy]

No doubt the RF looks interesting with all the features. The problem is the quality of the EQ and etc..

[ahbell]

how would u know if the quality is good or not?

[built]

... shall i get 3sixty2 or eclipse 7200. i'm not sure and i reli need help...

seriously, i think you should ask questions that make better
sense.

to start with, what good will the 3sixty2 do without d 7200?

[ahbell]

its because 7200 has build in processor as in EQ TA and crossover. but it has lesser EQ settings than 3sixty2 and crossover fuctions of 3sixty2 is more so i was wondering izzit necessary for 3sixty2 or changing a 7200

[qcb7819]

I'm not too sure bout 7200, but I used to have the 3sixty2, In a way it is good and in a way it's    , You need a laptop to configure the setting thru bluetooth.

however, if you are not satisfied with the tuning done and wanted to chenage the configuration, this is where the headache begins, the 3sixty2 bluetooth hangs

[Zenn]

if u get the 3sixty, your cd player is still the same old one...

start upgrading from the source, much better...