Author Topic: My Car Door Rattling .... (Read 3330 times)

netken · « **on:** February 26, 2008, 03:23:20 PM »

As expected ... there is some rattle here and there in my new car ...

And also on the speaker board ... what are my options available ? *trying to sound like newbie ...

Brownbread / DeadSpan / Bintumen / Dynamat / SikaDamp / Autofoam /

mnkh27 · « **Reply #1 on:** February 26, 2008, 03:36:00 PM »

Buy new car.

netken · « **Reply #2 on:** February 26, 2008, 03:37:29 PM »

Quote from: mnkh27 on February 26, 2008, 03:36:00 PM

Buy new car.

just bought .. can't afford another ..

i think i will avoid bitumen because it is kinda heavy ..

heard that brown bread is kinda good as it is self adhesive and can be taken out to stock somewhere else ..

Zenn · « **Reply #3 on:** February 26, 2008, 04:21:00 PM »

brownbread back in the market ka? who selling now...?

i was using it in the jazz back in 03, excellent stuff...

Audiophiliac · « **Reply #4 on:** February 26, 2008, 05:22:42 PM »

I think Brown Bread already rebadge as B-Quiet

netken · « **Reply #5 on:** February 26, 2008, 07:48:43 PM »

Quote from: Audiophiliac on February 26, 2008, 05:22:42 PM

I think Brown Bread already rebadge as B-Quiet

what do u mean?

DerekKuah · « **Reply #6 on:** February 27, 2008, 10:45:34 AM »

mine too..ratlling sound after install ice....especially at door side...i got put dynamat....
put my sound louder to avoid hear the rattling sound....sighhh

jinhan · « **Reply #7 on:** February 27, 2008, 02:03:58 PM »

Quote from: DerekKuah on February 27, 2008, 10:45:34 AM

mine too..ratlling sound after install ice....especially at door side...i got put dynamat....
put my sound louder to avoid hear the rattling sound....sighhh

same here....kik sam

Audiophiliac · « **Reply #8 on:** February 27, 2008, 02:21:36 PM »

Quote from: netken on February 26, 2008, 07:48:43 PM

what do u mean?

I mean that Brown Bread name already change to B-Quiet

netken · « **Reply #9 on:** February 27, 2008, 09:02:30 PM »

seems that pro-ice is the dist for brown-bread.. http://www.brownbread.eng.net/malaysia.html

you are right .. B-Quiet replaced BrownBread? http://www.b-quiet.com/ultimate.html

Zenn · « **Reply #10 on:** February 28, 2008, 12:56:10 PM »

pro ice hasnt been selling it since 2003, i remember coz i couldnt buy anymore.....only did front doors then finish oledi........

kevyeoh · « **Reply #11 on:** March 23, 2008, 07:29:32 PM »

but where to buy B-quiet at malaysia?

right now, i'm considering between raamat vs deadpan...but i think i'll get deadpan since i got problem contacting grexer...doesn't seem to answer my call...
:)

mnkh27 · « **Reply #12 on:** March 23, 2008, 09:40:17 PM »

netken sifu. Come check out my door. Took 4 days to complete. Rattle free. Look me up! Show you power install.

netken · « **Reply #13 on:** March 24, 2008, 12:42:25 AM »

Quote from: mnkh27 on March 23, 2008, 09:40:17 PM

netken sifu. Come check out my door. Took 4 days to complete. Rattle free. Look me up! Show you power install.

RUNNING AWAY .. POISON DETECTED ...

kevyeoh · « **Reply #14 on:** March 24, 2008, 09:56:55 AM »

mike, what material did you use?

malcolm · « **Reply #15 on:** March 24, 2008, 11:18:36 AM »

Quote from: mnkh27 on March 23, 2008, 09:40:17 PM

netken sifu. Come check out my door. Took 4 days to complete. Rattle free. Look me up! Show you power install.

any photo to share?

mnkh27 · « **Reply #16 on:** March 24, 2008, 12:05:04 PM »

No pics.

mnkh27 · « **Reply #17 on:** March 24, 2008, 12:05:23 PM »

Natural glue.

kevyeoh · « **Reply #18 on:** March 24, 2008, 10:01:51 PM »

got question here... i plan to install 3 layers...

for optimum dampening....should i stick more (2 layers) on the outer door skin or should i stick more on the metal layer where we install the speaker?
the vibration mostly happen at which layer of the door?

thanks...

andoropoi · « **Reply #19 on:** March 05, 2009, 08:59:05 AM »

After installing the dampening material for sometimes...then we wanted to take it off....is it difficult to do so? If so, anyway chemicals i can use to remove it from the panel? Thanks...

leonard ong · « **Reply #20 on:** March 05, 2009, 11:33:03 PM »

if dynamat extreme, you are in trouble of removing the bitumen completely

durkheim · « **Reply #21 on:** March 07, 2009, 09:09:17 AM »

Quote from: kevyeoh on March 24, 2008, 10:01:51 PM

got question here... i plan to install 3 layers...

for optimum dampening....should i stick more (2 layers) on the outer door skin or should i stick more on the metal layer where we install the speaker?
the vibration mostly happen at which layer of the door?

thanks...

You may want to try 'Damp It'. It looks something like Brown Bread but it is in black. Can be removed easily without causing a mess.

roy77 · « **Reply #22 on:** March 10, 2009, 12:29:15 AM »

for budget dampening, you might want to try SP MAT, using it in my car, quite ok...